The most color stable epoxy resin system.
For ordering and inquiries please call 877-403-8008.
Or visit our eBay Store.
PolymerProducts on eBay
Available Kit Sizes:
24 oz. Kit
1.5 Gallon Kit
Description
The MAX CLR Series of epoxy resin is for faster set-up time with minimal yellowing.
- Crystal color clarity
- Color stability that exhibits least darkening or yellowing over time
- Very high gloss and surface durability
- Impact resistance
- Ease of use – 2:1 mix ratio by weight or volume
- Excellent adhesion to numerous substrates
- FDA compliant coating for direct and indirect food contact
Physical Properties
| Density | 1.10 G/CC |
| Foam and Color | Clear Liquid |
| Viscosity | 800 – 1,200 cPs @ 25ºC Mixed |
| Mix Ratio | 50 Parts “B” to 100 Parts “A” By Weight |
| Working Time | 30 Minutes @ 25ºC (150 gram mass) |
| Peak Exotherm | 144ºC (150 gram mass) |
| Handle Time | 5.5 Hours |
| Full Cure Time | 36-48 Hrs. Minimum @ 25ºC |
Mechanical Properties
| Hardness | 80 ± 5 Shore D, 2H Pencil Hardness |
| Tee-Peel Strength | 4.3 Lbs. per inch Width |
| Tensile Strength | 9,100 psi |
| Tensile Shear Strength | 1,770 psi @ 25ºC |
| 800 psi @ -80ºC | |
| 670 psi @ 100ºC | |
| Flexural Strength | 13,100 psi |
| Elongation | 2.0% @ 25ºC |
| Compressive Strength | 9,200 psi |
| Compressive Modulus | 342 kpsi |
| Heat Distortion Temp. | 80ºC |
Electrical Properties
| Volume Resistivity | 2.7 x 1012 Ohms-cm |
| Dielectric Strength | 510 Volts/Mil @ 60 Hz. |