Flexible Casting Resin
Or visit our eBay Store, PolymerProducts.
Available Kit Sizes:
DESCRIPTION
MIX RATIO IS 2:1
MAX CAST A/B is a two part epoxy/urethane hybrid system specially formulated to provide extreme flexibility and elongation suitable for specialty casting and embedding applications.
MAX CAST will cure to a tough, flexible and a very tear resistant casting resin that is suitable for small to large castings.
MAX CAST A/B resists chipping, cracking and stress mark due extreme bending, flexing and cyclic vibration movement.
It will not crack and demonstrates excellent dimensional stability at temperatures -10°C and up to 100°C. It can be flexed and folded without shattering or stress cracking. Specimens were cured for 48 hours at room temperature to achieve full cure.
Physical and Mechanical Properties
| MIX RATIO | 2:1 |
| Tee-Peel Strength PC to PC | 25 Pounds Per Inch Width |
| Tear Resistance per ASTM D470 | 97 Pounds |
| Tensile Shear Strength | 1,800 PSI At 25 °C |
| 2,200 PSI At -80°C | |
| 450 PSI At 100 °C | |
| Tensile Strength | 1,600 PSI @ 25°C |
| Elongation At Break ASTM D638 | 50 % @ 25°C |
| Hardness ASTM D2240 | 60 Shore Dor80 Shore A |
| Impact ResistanceTwo-Inch Diameter Ball,560 Grams Dropped At HeightOf 24 Inches | No Damage, Flexed |
Electrical Properties
| Volume Resistivity | 4.7 X 1013 Ohms-CM |
| Dielectric StrengthASTM D150 | 480 Volts Per Mil .001 Inch |
| Dielectric ConstantASTM D149 | 4.0 (10 kHz) |
| Dissipation FactorASTM D150 | .014 (10 kHz) |